+ Reply to Thread
Results 1 to 5 of 5

Thread: No Chlorine showing up!!

  1. #1
    Join Date
    May 2012
    Location
    Minnesota
    Posts
    6

    Exclamation No Chlorine showing up!!

    Hi, i have a 40,000 gallon pool. We just opened it about a month ago and it's been a struggle to get chlorine to even slightly show up. We tried putting a very high concentrated shock bags into the pool a week ago and no chlorine. And yesterday we bought even more. Still not a trace of chlorine. The water is very cloudy and we are planning a pool party this thursday. I hope you guys may be of assistance to us.

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: No Chlorine showing up!!

    There are several things that can be contributing to the problem--the most likely two scenarios are 1)testing with strips, which are being bleached out by high levels of chlorine, and 2) ammonia that was left in the pool when high levels of CYA from last summer were broken down by algae over the winter. So...

    We can help, but we need to know more first. Please give us test results (drop-based, no strips!) for chlorine, pH, TA, CYA, and calcium hardness. Also, what type of pool (gunite, vinyl, plaster, etc), what size pump and type/size of filter you're using, as well as what ingredients you've put into the pool so far (ingredients, not just "shock"). Also, what is your regular chlorine source, and what was your CYA at closing last year?

    Is the pressure on your filter rising as the pump is running? You said the water is cloudy--is it blue cloudy or green?
    Janet

  3. #3
    Join Date
    May 2012
    Location
    Minnesota
    Posts
    6

    Default Re: No Chlorine showing up!!

    Chlorine:0
    TCI:3
    ALK:80
    PH:7.2
    Total Hardness:100

    Vinyle

    Filter: Sand & 2.7 Sq. FT

    Ingredients: Shock (12ish bags), Alkilinity, Chlorine tablets

    CYA: ? We didnt test this

    Pump Pressure: 10

    Cloudy is blue not green

    ========================

    O and one more thing.... This was the first year we let the pool freeze over winter fully filled rather than half full then frozen. Could that have anything to do with the problem

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: No Chlorine showing up!!

    I doubt freezing had anything to do with it. More likely, it's the same thing we've been seeing so much of this season: bacterial bio-degradation of CYA (stabilizer) to ammonia, creating a HUGE algae demand.

    Do you really have a 40K gallon pool? If so, we may need to look for a low cost source of chlorine; it can take 100+ ppm of chlorine to clean up the mess, and on your pool, that could be equal to 130 gallons of household bleach.

    Here's where I'd recommend starting:

    1. Get 4 quarts of polyquat, to keep your pool from becoming a total slime pit. (info here). If you can't find it locally, here's an Amazon link @ $18/qt:
    Kem-Tek 60% polyquat

    2. Do a bucket test for chlorine demand.
    + Get a CLEAN plastic bucket or garbage can, and fill it with 4 gallons of pool water (use a scale: 33 lbs + the weight of the bucket).
    + Dose with 1/8 cup of bleach, mix, and test with an OTO (yellow drops) kit (NOT: 'guess-strips' or DPD color match!!) You should see orange or brown.
    + Wait 30 minutes and retest: if there was high chlorine on the first test, and none on the 2nd test, you have confirmation of HIGH demand. If you see yellow, things aren't too bad.
    + Wait 1 hour, and retest. See if there's a difference.
    + If you've confirmed high chlorine demand, continue with 1/8 cup doses and 1 hour waiting periods until your chlorine level STAYS orange or brown.
    + Wait 4 hours, and see if there's change.
    + Let me know what you find.

  5. #5
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

+ Reply to Thread

Similar Threads

  1. Pool pump showing a high psi
    By Wakkoguy in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 07-17-2012, 11:54 PM
  2. Chlorine Not Showing Up...
    By tommypenngotti in forum Using Chlorine and Chlorinating Chemicals
    Replies: 5
    Last Post: 04-01-2009, 04:20 PM
  3. CYA not showing yet.
    By les_smith in forum Testing and Adjusting Pool Water Chemistry
    Replies: 16
    Last Post: 07-21-2006, 10:16 AM
  4. Still showing no cya
    By tjcat in forum DPD-FAS based testing
    Replies: 2
    Last Post: 07-02-2006, 04:41 PM
  5. Help! 911 - algae showing up
    By sw_stupid in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 06-23-2006, 07:44 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts