I am ready for BBB. My numbers are...

[duraleigh]

Hi, Scott,

This is tough to believe when you first start out but a chlorine smell around your pool indicates you need MORE Chlorine. That's not a typo. Getting your Cl level up to shock value will virtually eliminate that smell and clean up your water.

How much more? Well, it's not clear to me where your Cl is now but you need to add enough in there to reach 25ppm. It will immediately start down. You mission will be to keep adding it back in up to that 25ppm level as often as you can until your pools clears....and it will clear.

In order to do this effectively, you must have a test kit that will test for high Cl levels or trudge to the pool store a couple of times a day. We cannot tell you how much Cl to put in because we don't know your current Cl level. Post those numbers up and we'll all help you further.

[brent.roberts]

One of the tricks I learned on this site for harsh water is to add some salt. I tried it last summer and the family noticed the difference immediately. You can search here to find the right amount. Go slow, adding a bit, swim a bit, add a bit more.... repeat as needed. We stopped just at the point that you could barely detect the taste.

As I recal I added about 4 bags of 40 lbs each to our 16 x 32 IG ( about 17,000 to 18,000 gallons )

Good luck

[slater1182]

Great Feedback, Big Thank You.

some more infomation on my pool. In ground, plaster surface 16k gallons.

My water is clear. No murky or algae issues. which is good.

My goal is to be rid of the "pool guy" and maintain myself. I want to have the "right" mix of chemicals. Not just puck it and shock it as the pool guy does.

my next steps will be:
1. order testing kit x234
2. determine correct levels and re-post
3. if cya is in fact that high try and reduce
4. bring CL in line w/ lowered cya levels
5. I will read about the adding Salt online

I will repost when numbers are in from home test....
Have a great week...