-
Re: Water does not appear to be filtered very well
It is probably just too strong a pump for the filter, pushing the stuff through it like you suggested. I would dial it down a bit and see if that doesn't help.
-
Re: Water does not appear to be filtered very well
the pump is not able to be adjusted. there is no high or low or anything like that..........its just plugged in and goes at one speed. I will close the valve he installed, halfway and see if that does anything.............
-
Re: Water does not appear to be filtered very well
Maybe try a Flocculant or Clarifier to help the particle clump and become larger to allow the filter to "catch" them ?
-
Re: Water does not appear to be filtered very well
@ pratzert: If you have experience with a particular brand that has worked well for you, please mention it. We're trying to determine which ones work, and which ones just cause trouble.
-
Re: Water does not appear to be filtered very well
Hi Ben,
I have to look when I get home to see if I still have the bottle of the stuff I used last.
But I've only ever had to use a clarifier twice since I've had the pool (12 years).
It did seem to work.....
-
Re: Water does not appear to be filtered very well
-
Re: Water does not appear to be filtered very well
Well... I'm home and went on the search for the Clarifier I last used.
I found an old bottle of "Leslie's Ultra Bright".
It was open and 1/4 empty so that must be what I used.
I also found an unopened bottle of "Sparkle" clarifier whihc I bought from the old Eastern Manufacturing Co in Baltimore.
I don't know exactly how old the Clarifier is, but I am going to dump some in my 17K Galloin AGP and a few drops directly into the skimmer in hopes I can catch those small particles that seem to keep getting past my Cartridge system.
Last time I used it, it "seemed" to work/help... but in the end, who knows why my problem cleared up.
It's been many years ago......
BUT... B4 I spill any into the pool.... BEN.... what do you think ?
I've had to use about 10 boxes of 20 Mule team borax to get my pH up to 7.2. I think it's some residue from the Borax which keeps gathering on thge bottom of my pool.
I use Borax all the time to adjust the pH, but I have never, ever had to use so much of it as I did this time.
And I've never seen this sort of very fine particles that I can't keep out with vacuuming.
I guess I should be check out my cartridge, and maybe even replace it with a new one.
Tim
Last edited by pratzert; 06-22-2012 at 05:25 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks