AutoPilot Dig 220 Low Amps-Cell?/Check Clean Cell

[rcenturion]

I recently had the same warning indicator, but my amps reading was 0.2. If you're getting 5.2 amps, that would seem to be a normal reading since that's what I get when my system is running normally, or is 5.2 considered low for your cell type?

In my case, the problem was a corroded power cord. Since you eliminated all other possibilities, it would seem your cell is bad. I use the smaller SC-36 cell and they have lasted me about 4 years on average.

[tthurman]

Thanks!

I pulled out the SC-48 I mentioned I had, and manually cleaned it. As soon as I got it in, it was off and running, my pool has that crystal blue sheen to it again.

[pacsman]

Did you change the cell type in the installer menu? That should be the only thing that needs reset I believe. 28V and 5.0 + Amps would indicate that it is working as that is what i had on mine before the end of this last season as well. I am using an SC-48 but getting only 28V, 1.5 Amps currently. Have checked everything else and all things seem to be pointing to the cell?