+ Reply to Thread
Results 1 to 10 of 16

Thread: Need help quick with heater

Hybrid View

  1. #1
    docsobeck is offline PF Supporter Thread Analyst docsobeck 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    55

    Default Re: Need help quick with heater

    that sounds like a pretty good lead. wish it wasn't dark out! i'll check it out first thing in the AM. i'll report back.

  2. #2
    docsobeck is offline PF Supporter Thread Analyst docsobeck 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    55

    Default Re: Need help quick with heater

    ugh... one of the problems is that i'm not real smart. there's no breaker and no connections to check because it's a millivolt heater: there IS no electrical connection! it runs off a small charge generated by the pilot light. or, in this case, DOESN'T run.

    i'm definitely getting charge from the generator: i measure almost a full volt from the wires coming from the generator, and i read on a different site that somewhere in the neighborhood of .5 volt is needed to fire it. i'm going to try and jump all the other switches and such to see if that fires it...

+ Reply to Thread

Similar Threads

  1. Quick question: Efficient use of heater...
    By dcastine in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-17-2009, 03:24 PM
  2. Quick CYA question
    By doggie in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-15-2007, 02:15 PM
  3. A Quick Opinion PLEASE!!
    By sock monkey in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-23-2006, 11:23 AM
  4. Finally installed my new Sta-Rite heater. A quick review.
    By cruzmisl in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 06-21-2006, 03:52 PM
  5. some quick pump help please!
    By poolbee in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-06-2006, 08:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts