+ Reply to Thread
Results 1 to 10 of 11

Thread: Choosing a new pump/filter for my pool

Hybrid View

  1. #1
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Choosing a new pump/filter for my pool

    Either the Dynamo or Optiflo would be fine for your pool. On a typical AG setup, the Dynamo will deliver around 43 GPM and the Optiflo about 48 GPM and your filter can support up to 56 GPM so there should be no problem either way. I like the pump basket lid of the Optiflo a little better, easier to get off, but either one will work fine for you.

    Another option is to go with a combo unit. The PNCC0150OF2160 is a 150 sqft filter with a 1 1/2 HP Optiflo. The pump is still small enough not exceed the flow rate recommendations of the filter and you may get a better price but I would price both out to make sure.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  2. #2
    Join Date
    May 2012
    Location
    Kingston, ON
    Posts
    16

    Default Re: Choosing a new pump/filter for my pool

    Those systems do appeal to me, but I was trying to figure out through thread search here what the appropriate turnover for my pool would be, it seems large.

    If it means I could run the pump slightly less perhaps I'd be fine with that. Is it 115V? (I'm looking I may answer my own question) I see it is.

    Is Pentair's name in Pool products decent? We use them for some downwell applications, mostly their Variable Speed drives but we switched to Berekely pumps as their "SS" models were still rusting.
    14K gal 18 x 32 x 4 oval AG pool; Pentair Optiflo 1HP Dual Speed & C1200 Cartridge Filter; PF:8.5

  3. #3
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Choosing a new pump/filter for my pool

    Pentair seems to have a fairly good reputation in the industry and most people have been satisfied with their products.

    As for turnover, one turnover per day seems to be more than enough for some pools yet not enough for others. So the general rule of thumb, is run the pump long enough to get the pool clean enough for your own tastes.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  4. #4
    Join Date
    Jun 2011
    Location
    In the Sticks near Houston, TX
    Posts
    125

    Default Re: Choosing a new pump/filter for my pool

    By down-well do you mean water well?
    ~18K gal IG Gunite -- 1-HP Pentair Whisper Flo with new 2-speed motor. Intermatic T1000 Dual Speed Timer -- Tagelus 60D sand filter
    Hayward SWCG (up to 40K gal.) -- Polaris 280 and booster pump -- Rainbow (now Pentair) in-line chlorine Feeder.

  5. #5
    Join Date
    May 2012
    Location
    Kingston, ON
    Posts
    16

    Default Re: Choosing a new pump/filter for my pool

    Yes, we are a Water Pump and Treatment company here, and we use only Berkely pumps now, but they only have a commercial sized pool pump otherwise I'd use them.
    14K gal 18 x 32 x 4 oval AG pool; Pentair Optiflo 1HP Dual Speed & C1200 Cartridge Filter; PF:8.5

  6. #6
    Join Date
    Jun 2011
    Location
    In the Sticks near Houston, TX
    Posts
    125

    Default Re: Choosing a new pump/filter for my pool

    We have something in common then. I use and like the Pentair brand, but I can't get them at my usual discount (Sta-Rite pump discount).
    ~18K gal IG Gunite -- 1-HP Pentair Whisper Flo with new 2-speed motor. Intermatic T1000 Dual Speed Timer -- Tagelus 60D sand filter
    Hayward SWCG (up to 40K gal.) -- Polaris 280 and booster pump -- Rainbow (now Pentair) in-line chlorine Feeder.

  7. #7
    Join Date
    May 2012
    Location
    Kingston, ON
    Posts
    16

    Default Re: Choosing a new pump/filter for my pool

    Quote Originally Posted by TheGoose View Post
    We have something in common then. I use and like the Pentair brand, but I can't get them at my usual discount (Sta-Rite pump discount).
    I found out neither can I. The supplier has it setup so that the pool guys can't buy sub/jet pumps and we can't buy pool stuff. Darnit!
    14K gal 18 x 32 x 4 oval AG pool; Pentair Optiflo 1HP Dual Speed & C1200 Cartridge Filter; PF:8.5

  8. #8
    Join Date
    Jun 2011
    Location
    In the Sticks near Houston, TX
    Posts
    125

    Default Re: Choosing a new pump/filter for my pool

    Ah, then we have the same problem. If you like there is a forum for us W.W. guys. pumpsandtanks.com
    ~18K gal IG Gunite -- 1-HP Pentair Whisper Flo with new 2-speed motor. Intermatic T1000 Dual Speed Timer -- Tagelus 60D sand filter
    Hayward SWCG (up to 40K gal.) -- Polaris 280 and booster pump -- Rainbow (now Pentair) in-line chlorine Feeder.

+ Reply to Thread

Similar Threads

  1. Need help choosing a vinyl pool liner.
    By richmichmoon in forum --cleanup--
    Replies: 2
    Last Post: 06-19-2013, 10:07 PM
  2. Choosing a pool pump
    By Carolina in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-26-2012, 10:18 AM
  3. Help with Choosing the Right Pool
    By dmarino16 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 06-13-2012, 09:34 PM
  4. Need help with choosing the best equipment for my owner-built pool
    By jjearl99 in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 04-16-2012, 09:03 PM
  5. help choosing a filter
    By chalk2024 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 08-09-2006, 06:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts