Watermom's 'send' button is faster than mine
Re: First time using K-2006, need to interpret results
Watermom's 'send' button is faster than mine
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Re: First time using K-2006, need to interpret results
It may or may not be a pending algae bloom. It could just be having no CYA and losing all the chlorine to the sun.
Re: First time using K-2006, need to interpret results
Yes, could be, but that would be a lot of UV interaction, 18 ppm in 14 or so hours of daylight.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Re: First time using K-2006, need to interpret results
Where do I get cya additive from? I cannot find it at my local stores or am looking for it under the wrong name.
In Ground, 6,900 Gallon Gunite pool with tile trim, Haywayd EcoStar SP34000VSP Variable Speed, Aquarite 25k SWCG, North Florida
Re: First time using K-2006, need to interpret results
It is sometimes labeled as stabilizer or conditioner. Check the ingredients -- it should say cyanuric or isocyanuric acid.
Re: First time using K-2006, need to interpret results
It's also called conditioner, stabilizer, cyanuric acid, balancer. It should say on the label "100% cyanuric acid". Pool stores sell it, big box hardware stores might, and WalMart may have it.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Posting Permissions
Reply With Quote
Bookmarks