I just took the cover off my pool vaccumed it and the added 5 bags of shock,algaeside, clarifer& iron mite
I did that @ 9pm last nite pool is still green WHAT CAN I DO!!!!!!!
I just took the cover off my pool vaccumed it and the added 5 bags of shock,algaeside, clarifer& iron mite
I did that @ 9pm last nite pool is still green WHAT CAN I DO!!!!!!!
1. Add 7 gallons of PLAIN 6% bleach this evening. (about 15 ppm of chlorine -- use only 2 gallons if the algaecide had copper in it!)
2. Read the test kit page in my signature; get a cheap OTO kit *or* a HTH 6-way, if the Walmart in your area has one.
3. Test your pool, and tell us what you find, what the water looks like, what your pump / filter make/model are.
4. Do NOT add any more pool store chemicals, tell you have test results.
5. DO tell us EXACT brand & product name of what you've added.
6. Tells EXACT names of any chemicals you have left.
PoolDoc / Ben
The pool pump is a Dynamo the sand filter is a intex and the shock granules were called shock xtra by utekem
Last first: "were called" -- are the granules gone, or do you still have some?
You have an Dynamo pump and an Intex sand filter on a 27,000 gallon pool? That doesn't sound right. What are the dimensions of your pool?
Have you added bleach? Do you have an OTO kit? Did the pool hold chlorine overnight?
The pool is 27' round the pump is a 1-1half pump ,150lbs capacity filter system.
The pool water is still green. We have been vaccuming it out . Had a lot of leaves
On the bottom. Dont have any more chemicals . So do I add more bleach now
That I have it vaccumed out .
Post some current numbers, please.
Bookmarks