My pool is an AG, so it has a vinyl liner.
I've been using Ben's method now for 5 years in my pool and was surprised when my PH was adjusted so easily by the baking soda in my tub.
I do realize that the volume of water makes a big difference.
My pool is an AG, so it has a vinyl liner.
I've been using Ben's method now for 5 years in my pool and was surprised when my PH was adjusted so easily by the baking soda in my tub.
I do realize that the volume of water makes a big difference.
Before I had my pool/spa combo built I had a stand alone hot tub for many years using bromine. The biggest problem I had was that the constant airation would tend to cause a pH rise while lowering the alkalinity. What worked for me (after MUCH trial and error) was to adjust the alkalinity first and then lower the pH to the upper end of acceptable (I shot for about 7.6) After reading the FAQ on how to lower total alkalinity here on the forum (before the GREAT CRASH of 2006!) I realized that I was probably doing the right thing. Once again, with the small water volume in a spa it becomes crucial to know the exact amout of water as posible because your dosing might be in teaspoons insead of ounces!
Actually, I have the best water for my tub with PH 6.8 and ALk really low. Using baking soda I get the PH to come in at 7.6 and my alk to about 130 - 140. I usually get my PH in line and don't worry about the alk.
My PH and alk don't drop for weeks and when PH hits the 7.2 mark, I adjust again and the cycle starts again. My pool Alk stays pretty constant and I use borax to raise PH.
Posting Permissions
Reply With Quote
Bookmarks