Measure as BigDave says, on a new install you should be almost perfect. Most installation instructions say the pool must be within 1.5" level.
Measure as BigDave says, on a new install you should be almost perfect. Most installation instructions say the pool must be within 1.5" level.
Thank you all! Yes, you are correct in your advice to measure from the top of pool wall. We ended up calling a local installer and he advised the same and we measured and I'm happy to report that our pool is in fact level (within an inch) - thank goodness, I was stressed for a bit but as a new AGP owner I have a lot to learn. From the inside of the pool the ground is a bit unlevel but nothing too crazy. Thanks again.
looking to buy an above-ground pool!
Good news! By the way, update your signature with the details about your pool. Type, volume, type of filter, size of pump, if you have a Taylor K-2006, any other equipment, etc.
Bookmarks