one more question, if the pool had been green and stabilizer was added first what problems might have occurred?
Luckily I have been adding lots of bleach but it was disappearing quickly so I added stabilizer last night.
Thanks Again,
Renee
one more question, if the pool had been green and stabilizer was added first what problems might have occurred?
Luckily I have been adding lots of bleach but it was disappearing quickly so I added stabilizer last night.
Thanks Again,
Renee
27 ft x 52 in AGP
Hayward Power flo LS 1.5 hp - Hayward model s180t sand filter
27' round 17.2K gal AG pool; hand fed; Hayward model s180t sand filter sand filter; Hayward Power flo LS 1.5 hp pump; 24/7hrs; Taylor Complete FAS-DPD Pool Water Test Kit K-2006; orig. truck but use well to resupply; summer: ; winter: ; ; PF:7
No problems. Having added stabilizer just means that your needed chlorine levels will be higher since there is a correlation between the two. (You can read about it in the Best Guess Chlorine Chart in my signature below.)
Thanks watermom. I have done just that and all my numbers are fine but I was wondering why the pool turned cloudy - pretty sure I found the answer in another thread, pollen. I put the sock on and with in an hour I had to rinse it off. Getting ready to head out again, hopefully this will clear up soon.
27 ft x 52 in AGP
Hayward Power flo LS 1.5 hp - Hayward model s180t sand filter
27' round 17.2K gal AG pool; hand fed; Hayward model s180t sand filter sand filter; Hayward Power flo LS 1.5 hp pump; 24/7hrs; Taylor Complete FAS-DPD Pool Water Test Kit K-2006; orig. truck but use well to resupply; summer: ; winter: ; ; PF:7
That very well could be. Those skimmer socks will catch a lot of the small stuff.
Bookmarks