Beginning of the season and found that my stabilizer in the pool was less than 30 ppm. I purchase some more at the pool store where they also tested my water for stabilizer and said that it was reading at 18ppm. I purchased 8# of the stabilizer and added it twice in 4# increments. After the first add, my CYA per the Taylor test kit still read less than 30 ppm. I added the second 4#, waited a few days (it rained one day) and my CYA now reads at 35 ppm. The rest of my readings are within range (as long as I keep adding bleach).

My pool is in ground, 25000 gals, well water fed and I live in south Georgia. If possible, please provide the next step in order to get the stabilizer in range ...... I think that that should be about 50ppm. Also, based on what my stabilzer target is, what should my chlorine level be to match with it?

Thanks for any help.

Jim K.