Image11.jpgImage10.jpgI hired a leak detection company who, after 4 hours of testing, put a mark on my deck and said "Dig here you'll find the leak". Sure enough there it was but almost completely embedded in gunite. I have been chipping away slow and carefully so as not to damage other pipes or fittings. As the picture shows the PVC pipe is bulging and is not properly connected to the fitting and it leaks badly. Eventually I will get the gunite cleared all the way around it so I can execute a repair. That’s my problem, how to repair it? The way the fittings are so interconnected I can’t take it apart and reassemble it. My thought is repairing it with epoxy putty. Any thoughts would be appreciated. Thanks in advance.