My concrete guy jus finished wih placing the bottom in an 18x36 diy project. I knew going i that He had limited amount of experience with the krete. Buth that was more than I had. We are in a rural area and you have to take what you can get. Now the botom was placed over a thee day period and there are stop and start seams wih high spots and deep narrow cravases between addittion.My instruction to him was to knock down the high spots and then flow in the crevices with a sluryy paste onto a wet srface with a grout float. Floating everyything to a feather end.

Dose this sound like the right course of action? He will be here in a few hours to give it a try.


HELP

John