+ Reply to Thread
Results 1 to 10 of 23

Thread: opening pool - water test results

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: opening pool - water test results

    Strips are going to answer the question "is there any, or no, chlorine in the pool". They won't reliably tell you how much. You can get a cheap OTO kit (Walmart, Lowes, Home Depot, or anywhere else they sell pool stuff) that uses red and yellow drops for pH and chlorine--they usually measure up to 5 ppm and you can dilute the sample to read a little higher if you need to.

  2. #2
    Join Date
    Apr 2012
    Location
    New Jersey, USA
    Posts
    30

    Default Re: opening pool - water test results

    i already have the $50 drop kit that Taylor makes, but it is a PITA to check the chlorine with that EVERY day, since i am using bleach. plus i dont think I'll have enough chemical to make it through one season.

    i was wondering if there was a quicker/easier to check the chlorine daily and them formally drop check the water every few weeks for the other values.
    7.5K gallon 12x24 AG pool, 2-spd 1.5hp running on low, high for vacuuming; cartridge filter PF: 16

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: opening pool - water test results

    Once you have your pool chemistry on a steady routine, you won't need to test so much.

    Also, if you got an OTO kit like recommended, you can use that in between DPD-FAS tests -- it's not as accurate, but it's FAR more accurate and reliable than test strips.

  4. #4
    Join Date
    Apr 2012
    Location
    New Jersey, USA
    Posts
    30

    Default Re: opening pool - water test results

    thanks, i'll look into it.
    7.5K gallon 12x24 AG pool, 2-spd 1.5hp running on low, high for vacuuming; cartridge filter PF: 16

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: opening pool - water test results

    Mike, that is what I do. I use my OTO kit daily or at the very least, every other day. Then, I use my K-2006 occasionally. It makes the reagents last a lot longer and for every day use, the OTO/Phenol Red kit gives you all the info you need. If you are fighting something in the water or trying to clear up a pool, you need the FAS-DPD component for testing higher chlorine levels than an OTO can handle but otherwise, the cheaper kit is sufficient for most daily testing. (Plus, replacing the OTO refills are cheap.)

  6. #6
    Join Date
    Apr 2012
    Location
    New Jersey, USA
    Posts
    30

    Default Re: opening pool - water test results

    im opening my pool just now for the summer and coming back to this thread to to see the level of chlorine i need to be at.

    Just want to say thanks again for all your help and great advice. i stuck with bleach the entire summer. i thought it would be a pain to drop in the bleach each night but once i got into the routine it was easy and i didn't have one algae bloom and my water was crystal clear all summer. thanks !!!
    7.5K gallon 12x24 AG pool, 2-spd 1.5hp running on low, high for vacuuming; cartridge filter PF: 16

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

+ Reply to Thread

Similar Threads

  1. Opening the pool a little early. Here are my test results so far.
    By bri3180 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 0
    Last Post: 02-19-2013, 01:24 PM
  2. Opening pool test results
    By GregP in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-18-2012, 11:37 PM
  3. Test results for Spring opening
    By iBrew in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-04-2012, 07:19 PM
  4. Opening test results
    By Bnelson in forum DPD-FAS based testing
    Replies: 1
    Last Post: 05-30-2007, 06:51 PM
  5. Test results for opening
    By tjcat in forum DPD-FAS based testing
    Replies: 1
    Last Post: 05-26-2007, 09:12 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts