External timer

[Medic]

My first post has to be here, so please excuse me if this question has been answered before.

I have a Dig 220, just installed the relay as per the instructions. I have triple checked the wire configuration.

My unit still says external timer. I do hear a click when I hit boost, but cannot get my pump to come on. I do see program 1 occasionally in the screen, but cannot get it to program.

How do I get it out of 'external timer' and program mysingle stage pump. BTW, it is set up for 220 and I did check the board to make sure the jumper was in place for 220.


Edited to add.... OK, so I found the answer. The manual says to hold the menu button for 13 (thirteen) seconds, not 1-3. Now if I can just solve my priming problem that just started ... LOL.

This is my second SWG, the first one lasted me almost 8 years and was mostly problem free..

Any thoughts or ideas would be most appreciated.

Thank you in advance for any input.

[BigTallGuy]

Hi Medic and welcome to the Forum. Glad to hear that you found and fixed your problem with your unit. Can you describe your priming problem in more detail?

[Poolsean]

Please feel free to contact me directly if you have any specific questions on your DIG-220.