+ Reply to Thread
Results 1 to 10 of 17

Thread: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

Hybrid View

  1. #1
    ernie1959 Guest

    Default Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    Have 18 x 36 (plus 4x8 steps) blue solar cover, not sure if 12 or 16 mil, most bubbles popped after 3 1/2 years, looking for replacement. Mine has "solid" edges (about 3 inch flat section on each side, so that you don't pop any bubbles or tear cover while pulling it off the reel.

    In looking for a replacement I have several concerns:

    1) Nobody seems to offer the flat edges on the sides. I'm concerned about grabbing a fistful of bubbles to pull a heavy cover off of the reel, thinking that they will pop, and the cover will tear.

    2) Have a fairly heavy cover now, but not sure if I have 12 or 16 mil. Live in climate zone 5, so looking for good heat retention. Have Rocky Roller reel.

    3) Pool is 18x36 plus a 4x8 step section. Everyone wants to sell me a 20x40 and tells me I'll just cut off one side. That seems wasteful and will leave me with a potentially jagged side (can't imagine it's easy to cut a perfect line). No better options?

    4) Are there quality differences between sellers, or is this one of those products where they're all buying from the same supplier?

    5) Some people say clear or silver are better for heat generation than blue. True or false? My wife really wants the blue "look" and has ruled out the silver, but might consider clear if our blue liner would show through the clear cover.

    New to the forum and it won't let me search yet, so sorry if this topic has been discussed. Any help would be, well, helpful. Thanks!

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    You can search, using the link in my signature. It's been discussed a number of times, but not with any clear resolution.

  3. #3
    ernie1959 Guest

    Default Re: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    No "clear" resolution? Are you having fun with a new member?

    How about all of my other questions? Anyone?

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    No. Between now and July 4 my puns are likely to be an accident, rather than having fun.

  5. #5
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    From my own experience, clear seemed to heat better than blue and 12 mil lasted much longer than 8 mil. As for 16 mil, handling starts to become an issue and I haven't gone that route yet. Also, I think the 12 mil price point is a little better for the extra life.

    Even though I have solar, my goal is to run the pump as little as possible especially on high speed and with the clear cover, I managed to do that with a few hours of run time except on colder days. The blue cover just didn't seem to add as much heat but it did seem to preserve the chlorine a little better. But it is kind of hard to do side by side comparisons because of the number of variables involved which is why there doesn't seem to be much consensus.

    But from a purely theoretical point of view, here is how I would list the attributes of each cover:

    Clear cover - Lets more sun energy through to directly heat the water but probably has a little more radiative heat loss back out so this cover should have the highest heat gain and perhaps the highest heat loss as well plus the lowest UV shielding for FC extinction.

    Sliver Bottom - Lets virtually no sun in, sun heats the cover surface which is transmitted to the water via conduction and re-radiation (both directions) which will have more heat loss to the environment but the silver backing should help to reduce the radiative heat loss from the water to the environment. I would expect this cover to have the lowest heat gain but also the lowest heat loss and the highest UV shielding to preserve FC. But this shielding comes at a cost of higher cover temps during the day which could reduce the life of the cover.

    Blue Cover - Lets more sun in than a silver/black cover but less than a clear cover so heat gain will be less than a clear cover but heat loss should be similar to a clear cover or slightly better. I would expect this cover to have a heat gain and loss somewhere between the other two and UV shielding between the other two.

    All covers will probably have nearly the same R-Value so convection losses from the water to the air are probably similar.

    So from these descriptions, the average water temperature (24 hr) may end up being the nearly same but the clear clover should give you a higher water temperature near the end of the day which is what I experienced.

    But one of the reasons I chose a clear cover is because I have a SWG and when the water dries on the cover the salt stays behind and it is very white which is not as noticeable on a clear cover.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  6. #6
    ernie1959 Guest

    Default Re: Solar blanket - 12 vs. 16 mil/color/cutting edges/steps

    Thanks Mark. I guess I was hoping that there had been some definitive testing showing that one type has a better overall net heat gain.

    So are all blankets now "bubbles to the edge" instead of the flat edge seams like my old one has? I know we have to tug pretty hard when pulling the blanket off the reel, and imagine popping a lot of bubbles as we grab a handful of blanket.

    Since it appears I'll have to get a 20x40 blanket, and cut it, are there any tips on cutting? I assume I'll just cut one side after letting it sit on the pool a couple days to see how it settles.

+ Reply to Thread

Similar Threads

  1. Solar blanket roller?
    By Mr.Mooks in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 07-15-2011, 03:37 AM
  2. Cutting Solar Cover
    By rrands in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 09-29-2006, 07:17 PM
  3. Solar blanket question
    By halds in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 05-31-2006, 05:23 PM
  4. Most Effective color for solar blanket
    By redger in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-08-2006, 05:49 PM
  5. Need new solar blanket
    By Karen_in_TN in forum Above-Ground Pool Construction & Repair
    Replies: 4
    Last Post: 04-10-2006, 10:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts