Chlorine level is low

[Watermom]

Don't waste your test reagents re-testing CYA unless you have added some. Also, a test result of 30 and one of 35 is basically the same. That test is not too precise so it is not uncommon to get a varied range of results. Did you test your pH when the chlorine was high? If so, you can get falsely high pH readings. Do you have a Taylor K-2006? (Again, I don't want to take the time to re-read this thread.) If you do, please put that in your signature below. It helps us to help people when we know what kind of kit they are using.

[sherriemoseley]

Yes I am using k2006 and I added it to my signature. FC was 11 and CC was .5

Also so my pump has been running 24/7.

[sherriemoseley]

I just added 1/2 gallon of bleach to bring FC up to 15. I will check it again tonight when I get home from work to make sure its still 12-15 FC and if its not I'll add more bleach and test again in the AM.

[sherriemoseley]

For some reason I cant figure out how to start a new thread so I hope someone see's this and can answer I added liquid stabilizer to my pool this morning and was wondering how long I should wait to retest the CYA. I know they say to wait a week with the other but I cant find anything on the liquid.

[PoolDoc]

With liquid stabilizer, you only need to wait a few hours of pump circulation.

[Watermom]

Sherrie,
To start a new thread:

From the forum homepage, click on the sub-forum where you topic fits. In the upper left above the first thread in that forum, there is a blue rectangular box that says "post new thread" that you click on. From there, you can give your new thread a title and write your post and click on submit. Your thread will then become the first thread in that sub-forum.

Hope this helps.

[sherriemoseley]

Thanks Watermom! I see it now.