If the green is algea then you'll need to keep the water at 10+ ppm chlorine until it's dead. This will be much eaiser to measure when the K-2006 arrives. If the green is copper, then I'd check that SWCG for the copper feature.
If the green is algea then you'll need to keep the water at 10+ ppm chlorine until it's dead. This will be much eaiser to measure when the K-2006 arrives. If the green is copper, then I'd check that SWCG for the copper feature.
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
Yeah it is algea inside the old hoses. They are gross. The insides are covered with brown greenish tinted dead stuff that flakes off when I pull it with my fingernail.
I can only imagine what the pool looked like when that guy had it set up.
That being said when I set it up the liner looked perfectly clean to me. No red flags went up at all. He must have tried to clean the liner and overlooked the hoses. I'm glad I didn't hook up those hoses to my new pump and shoot all that stuff into my pool!
The previous owner didn't have the SWCG and mine isn't hooked up yet so that is safely ruled out. I would like to check my SWCG though out of curiosity, even though it never presented any issues in 3 seasons. I will have to look up how to do that.
My First Pool - Starting small to make sure pool ownership is for me
18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system
Oh! I get it. The pool came from one place and the pump / filter / swcg came from another!
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
Yes. Sorry I wasn't clear.
Pool - craigslist for $100. Listed as only used for 1 season and the owner hated having a pool. (explains the algea)
Pump/filter/hoses - Brand new
SWCG - From Parents who used it for 3 seasons with an intex pool they are not going to put up anymore since we have ours.
My First Pool - Starting small to make sure pool ownership is for me
18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system
research on my SWCG.
Looks like intex added the copper garbage in fall of 2009. I called my wife who says mine shows a manf date of august 08. I looked at pics of the new one and mine does look different.
Looks like I am safe from the copper!! Great news!
That being said... I did read that the section with the copper ionizer on the new ones can just be disconnected.
My First Pool - Starting small to make sure pool ownership is for me
18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system
I tested FC when I got home tonight.
It basically showed none at all. The water in the tube stayed clear. Tested again and got same thing.
I put in a gallon of bleach, stabilizer, and put the debri cover on the pool.
The pump is still running. The water is still improving. Looks almost clean now.
My First Pool - Starting small to make sure pool ownership is for me
18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system
I think you're going the right way. A gallon of bleach every night until you can start seeing a residual the next afternoon. Cloudy days will use less chlorine than sunny days. When you get the K-2006, we'll start looking for how much chlorine you lose over night and how much combined chlorine you have. In the mean time, try to keep the chlorine at shock value as often as you can. (orange OTO)
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
My First Pool - Starting small to make sure pool ownership is for me
18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system
Bookmarks