+ Reply to Thread
Results 1 to 10 of 39

Thread: New pool installed and filled with water - Now what?

Hybrid View

  1. #1
    Join Date
    Nov 2011
    Location
    Littlestown Pa
    Posts
    33

    Default Re: New pool installed and filled with water - Now what?

    Oh. I see. I misunderstood. I was thinking I was supposed to put it in when my FC hits about 5.
    Okay I will put it in when I get home. I understand now.

    What are your thoughts on the cover question?

    The water looks pretty good. Not clear but def not AS greenish. BTW... I used new hoses with my new pump - but last night I went to the garage and looked inside the hoses I got with the pool and guess what... green and grose. Now I know why my water in my "new" pool looks green.
    Dissapointing.
    My First Pool - Starting small to make sure pool ownership is for me
    18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system

  2. #2
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New pool installed and filled with water - Now what?

    If the green is algea then you'll need to keep the water at 10+ ppm chlorine until it's dead. This will be much eaiser to measure when the K-2006 arrives. If the green is copper, then I'd check that SWCG for the copper feature.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  3. #3
    Join Date
    Nov 2011
    Location
    Littlestown Pa
    Posts
    33

    Default Re: New pool installed and filled with water - Now what?

    Yeah it is algea inside the old hoses. They are gross. The insides are covered with brown greenish tinted dead stuff that flakes off when I pull it with my fingernail.
    I can only imagine what the pool looked like when that guy had it set up.
    That being said when I set it up the liner looked perfectly clean to me. No red flags went up at all. He must have tried to clean the liner and overlooked the hoses. I'm glad I didn't hook up those hoses to my new pump and shoot all that stuff into my pool!

    The previous owner didn't have the SWCG and mine isn't hooked up yet so that is safely ruled out. I would like to check my SWCG though out of curiosity, even though it never presented any issues in 3 seasons. I will have to look up how to do that.
    My First Pool - Starting small to make sure pool ownership is for me
    18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system

  4. #4
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New pool installed and filled with water - Now what?

    Oh! I get it. The pool came from one place and the pump / filter / swcg came from another!
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  5. #5
    Join Date
    Nov 2011
    Location
    Littlestown Pa
    Posts
    33

    Default Re: New pool installed and filled with water - Now what?

    Quote Originally Posted by BigDave View Post
    Oh! I get it. The pool came from one place and the pump / filter / swcg came from another!
    Yes. Sorry I wasn't clear.
    Pool - craigslist for $100. Listed as only used for 1 season and the owner hated having a pool. (explains the algea)
    Pump/filter/hoses - Brand new
    SWCG - From Parents who used it for 3 seasons with an intex pool they are not going to put up anymore since we have ours.
    My First Pool - Starting small to make sure pool ownership is for me
    18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system

  6. #6
    Join Date
    Nov 2011
    Location
    Littlestown Pa
    Posts
    33

    Default Re: New pool installed and filled with water - Now what?

    research on my SWCG.
    Looks like intex added the copper garbage in fall of 2009. I called my wife who says mine shows a manf date of august 08. I looked at pics of the new one and mine does look different.
    Looks like I am safe from the copper!! Great news!

    That being said... I did read that the section with the copper ionizer on the new ones can just be disconnected.
    My First Pool - Starting small to make sure pool ownership is for me
    18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system

  7. #7
    Join Date
    Nov 2011
    Location
    Littlestown Pa
    Posts
    33

    Default Re: New pool installed and filled with water - Now what?

    I tested FC when I got home tonight.
    It basically showed none at all. The water in the tube stayed clear. Tested again and got same thing.

    I put in a gallon of bleach, stabilizer, and put the debri cover on the pool.
    The pump is still running. The water is still improving. Looks almost clean now.
    My First Pool - Starting small to make sure pool ownership is for me
    18' Round AG Intex metal frame, 2500gph Intex pump, Intex Saltwater Generator system

  8. #8
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New pool installed and filled with water - Now what?

    I think you're going the right way. A gallon of bleach every night until you can start seeing a residual the next afternoon. Cloudy days will use less chlorine than sunny days. When you get the K-2006, we'll start looking for how much chlorine you lose over night and how much combined chlorine you have. In the mean time, try to keep the chlorine at shock value as often as you can. (orange OTO)
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

+ Reply to Thread

Similar Threads

  1. Green water in freshly filled pool -- algae or iron?
    By Priceless in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 06-30-2013, 09:56 PM
  2. Newbie here! Already filled my intex 15x36 pool with water (Oops!)
    By joolz1226 in forum Pool Chemistry for Intex-type Pools
    Replies: 7
    Last Post: 08-03-2012, 07:40 PM
  3. New liner filled, green water?
    By szcakes in forum Pool Chemicals & Pool Water Problems
    Replies: 4
    Last Post: 03-30-2008, 07:33 PM
  4. Cloudy water in freshly re-filled pool
    By lynnybug55 in forum Pool Chemicals & Pool Water Problems
    Replies: 9
    Last Post: 04-12-2007, 04:22 PM
  5. new pool just filled with well water
    By jimmyzshack in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 06-20-2006, 02:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts