Well no. I just kind of lurk around during the season and read up on stuff to help me along the way.
I don't feel I am a good advice giver here. I can only reply to posts based on my own experiences.
If that's what you mean.
I never really had and issue with my pool and have using BBB since I bought the pool in 04". I usually can figure stuff out myself, but these past two years were a doosey!!!
I have the rest figured out fine and don't want to tie up the forum.
Mike NJ
12x18 vinyl AG 6.2K gal; Hayward equp: 16" sand filter (spring clean up) -- Xtream 100 sft cart (after clean up) -- Power Flo Matrix 1hp 2spd pump w/ AO Smith motor
Ok. Well, we'll be here if you need us. Don't be a stranger. Pop in and say hi once in awhile! Have a great swim season!
Congrat's, it's great to see your clear blue water. Perhaps as you lurk, you can offer your experience to others who have unfilterable cloudines. Have a great season!
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
Congrats on your clear water! Mine still isn't clear all the way. I have a whole new filter on the way and may try adding clarifier if the new system doesn't clear it up.
18' round 7.5K gal AG vinyl pool; bleach; Hayward C900 cartridge filter; Hayward Power Flo Matrix 3/4HP pump; hrs; HTH 6-way test kit
; community; PF:16
Just to revive this thread to give aditional feedback.
2011 and 2012 I had cloudy pools that did not clear. I re read this whole post. What I can say is I did not use polyquat upon closing those two year. Is it related? IDK.
All I know is the past 3 pool closings I use polyquat. Upon opening, even with just my leaf cover, the pool stays somewhat clear. Just a fine layer of green on the bottom maybe. Pool cleared up fine the past couple of year with in days..
Not sure if it was that leslies algae stuff I added those two years.. Whatever it was it wasn't polyquat I know that for sure...
Well hope all is well here . I am sorry I have not been around.. Ill try to pop in more often.
Mike.....
12x18 vinyl AG 6.2K gal; Hayward equp: 16" sand filter (spring clean up) -- Xtream 100 sft cart (after clean up) -- Power Flo Matrix 1hp 2spd pump w/ AO Smith motor
Hi. Good to hear from you.
You have a long history. I use polyquat too, but only on closing. After I use it, I bring my FC back up to shock level.
Don't be a stranger!
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Bookmarks