No power light

[Poolsean]

What system do you have?
Have you checked your power to the power supply (make sure you have voltage going to it)?
Have you checked the internal fuses (most systems have a main fuse protection)?

[gohogs1]

It's a Hayward aquarite with a t-9 cell. Power to the board is good fuse is good and the thermistor is good. I think it was damaged when my timer caused the voltage to drop. That was what was causing my pump to overheat.

[kirkdbjl]

I had the same proble and the mother board had gone out. You will probably need to replace the mother board if yu haven't already