+ Reply to Thread
Results 1 to 10 of 128

Thread: adjust cya before or after shocking

Hybrid View

  1. #1
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    The chlorine has not been below 6 in at least a month so I guess the algae wasn't completely dead...tho I tested and went back and forth with the forum experts till we thought it was.
    So, I will test CYA in the morning then check pool calculator to find amount of bleach needed to shock then test and keep at shock levels and test and on and on. Does that sound right?
    Thanks.
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  3. #3
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: adjust cya before or after shocking

    You ( and Watermom of course ) are right. Is the algae in the water or on the walls and floor? Brushing the pool will help get the chlorine to the algae stuck on pool surfaces.
    So, the recipie is:
    Bring your FC up to shock level for your CYA and keep it there as best as you can by testing and dosing as often as you can.
    Shut off the SWCG and run the pump 24/7.
    Backwash the filter when pressure climbs 8-10psi over clean pressure.
    Brush the pool, especially where algae is visible.
    When you have less than 1 ppm FC loss overnight and minimal CC (less than 0.5 if using the 10ml sample size), keep the FC at shock for one more day.
    Please use the "Edit your signature" link in Watermom's sig to add your pool's particulars to your signature.

    Be patient.
    Don't worry, you'll get this under control.
    Keep us up to date.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: adjust cya before or after shocking

    I scanned through this thread, and could not find a reported CYA level . . . .

  5. #5
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: adjust cya before or after shocking

    On 04-15-2012 at 05:02 PM on page 7 of this thread OP posted CYA of 30, since then has been adding CYA in a stocking.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  6. #6
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    CYA = 40 this morning so according to "Best Guess" I need to shock at FC = 15 and stay there or above.
    Dave, algae is mostly on the bottom and lower sides of pool. Thanks for recapping the steps.
    I'll edit signature.
    Thanks!
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  7. #7
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: adjust cya before or after shocking

    Do you still have the dichlor? You can use that to move toward your shock level and your CYA goal but remember as CYA goes up so does your FC goal for shock and normal operation.
    How much dichlor do you have on hand?
    Is there still CYA in the stocking?
    Do you bleach / Liquid chlorine on hand? How much?
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  8. #8
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    No more dichlor on hand. There is still CYA in stocking but I have removed it from the pool. I don't have any bleach on hand so was heading to the store. Should I use dichlor or bleach? I haven't done a cost analysis. If I use dichlor, do I need to raise pH to 7.6 before I start?
    Last edited by Kateyru; 05-08-2012 at 09:59 AM.
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

  9. #9
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: adjust cya before or after shocking

    Quote Originally Posted by Kateyru View Post
    CYA = 40 this morning so according to "Best Guess" I need to shock at FC = 15 and stay there or above.
    Yes! And, brush all the algae spots AFTER adding a chlorine dose.

    (Thanks, Dave!)

  10. #10
    Kateyru is offline Subscriber Thread Analyst Kateyru 0
    Join Date
    Apr 2012
    Location
    Alabama
    Posts
    110

    Default Re: adjust cya before or after shocking

    no problem toting bleach...easier than toting 40 lbs. bags of salt. yes, brush, brush, brush! My new mantra: Yes I can...defeat algae!!!
    Thanks!
    16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5

+ Reply to Thread

Similar Threads

  1. How to adjust CYA down
    By l8nite4me in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-13-2007, 03:27 PM
  2. How to Adjust pH and TA
    By iwannapool in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 05-15-2007, 04:22 PM
  3. What should I adjust ?
    By aswetich in forum DPD-FAS based testing
    Replies: 6
    Last Post: 07-27-2006, 06:33 PM
  4. Adjust TA first, right?
    By jnorris in forum Dealing with Alkalinity and Calcium
    Replies: 12
    Last Post: 06-30-2006, 10:07 AM
  5. Which one should I adjust first
    By Sunny32504 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 05-23-2006, 12:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts