FC = 18.5 this morning, same as late yesterday afternoon. So, no more bleach unless 1 of you experts tells me otherwise. When do I increase CYA to get it between 70 and 80 as recommended?
FC = 18.5 this morning, same as late yesterday afternoon. So, no more bleach unless 1 of you experts tells me otherwise. When do I increase CYA to get it between 70 and 80 as recommended?
16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5
I just had a thought. Is you SWCG running? (this is not a prank call)
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
Yes.
16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5
OK, that could explain how FC went from 16 to 18.5 without adding bleach.
Can you shutdown SWCG without shutting down pump / filter? If yes, please do.
How's the water look, has the cloudy cleared? Running pump / filter 24/7? How's the filter pressure?
Please test FC, CC, and pH add bleach if FC is below 15 and get a FC reading at dusk so we can see how we're doing at dawn.
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
I have shut SWG down. Pump/filter has been running 24/7 except about 2 hours today when I ran robotic pool cleaner. Filter pressure has remained constant since 4/1/12 tho I backwashed late this afternoon. The water is not cloudy and there are no visible signs of dead algae. I brushed and saw nada. I wouldn't say the water is sparkling but definitely is clear. I guess I would describe it as a dull clear. Test numbers at 5pm with sun behind the trees: FC = 15.5, CC = 0 and pH = 7.3 to 7.4. I have not added any bleach today.
So, I should test FC, CC and pH at dawn? I have to leave my house about 6:20 in the morning and will be gone all day. Could you give me recommendations for the morning. I'll test and proceed per your guidance.
Thanks!
16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5
H2O Ma, you're back...so if I have more than a 1 ppm drop or more than .5 CC, I'll need to add bleach, right? Just trying to make sure I'll know how to proceed.
and do I turn SWG back on in the morning?
Last edited by Watermom; 04-11-2012 at 06:45 PM. Reason: merge posts
16'x30' rectangle 22K gal IG vinyl pool; SWCG; Hayward Pro SEries S220T sand filter; Hayward pump; hrs; Taylor K-2006 ; city; PF:5.5
Yes, If more than a 1ppm drop or CC greater than 0.5ppm, then you're not done and you'll need to add bleach. Otherwise, let the cl drift down. Keep your SWCG off until your cl drifts down. No reason to waste your cell life.
Bookmarks