[ broken quote removed -- moderator ]

Thanks for getting back with me so quickly. I have no issues with working with electricity my only problem is how to put on the seals in.
Here's the info on my pool

+ Location - Central FL Orlando area so we dont winterize pump runs 6 hours a day in the winter and 8 in the summer

+Pump Model# don’t know it's a Northstar 2hp

+ Height of pump relative to the pool water level - Don’t know but I have never had an issue with losing the prime or priming the pump and filter even after cleaning

+ Diameter and number of individual suction pipes from the equipment to the pool - I think 2"

+ Diameter and number of individual return pipes from the equipment to the pool - I think 2"

+ eyeballs - 5 in the pool and 6 in the spa

+ Distance from the pool to the equipment 20' est.

+ Filter type and backwash valve model if known Hayward quad with no backwash
PSI 24

+ Heater - Hayward heatpump

+ Pool spa - yes 6 1 1/2 "

+ Check valves????

I've been told by a pool repair guy that my problem is my roof runoff is falling directly on the motor and shortening the life. He suggested putting up a gutter over the pool equipment