Results 1 to 10 of 11

Thread: Pebble surface for Beach Entry?

Threaded View

  1. #9
    Laguna Joe is offline ** No working email address ** Laguna Joe 0
    Join Date
    Dec 2005
    Location
    Houston, Texas
    Posts
    8

    Default Re: Pebble surface for Beach Entry?

    The beach entry slopes from 0" to 12" over a 10 foot width. Due to the coping line, there is still a 3" step down from the deck to the surface of the beach entry.

    Bubblers were installed near the shallow end (6" water depth) to prevent stagnant water in the beach entry area.

    The pool depth opposite the beach entry is 4-1/2 - 5 feet.

    You would be well advised to add a light in the wall of the beach entry. My builder did not suggest it, but I ran across the recommendation in the old forum, and I can tell you now, we could not live without it. The pool light simply cannnot illuminate the beach entry.
    Last edited by Laguna Joe; 05-19-2006 at 11:22 AM.

Similar Threads

  1. Cost of separate color for Pebble Tec with Tanning Ledge and Beach Entry
    By jeremywitte in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 05-25-2012, 05:07 PM
  2. Pros and cons of beach entry
    By jeff1 in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 04-26-2012, 09:56 AM
  3. Sloped/Beach entry
    By us3 in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 09-23-2006, 11:23 PM
  4. Proper circulation in shallow beach entry
    By beary in forum In-Ground Pool Construction and Repair
    Replies: 11
    Last Post: 06-09-2006, 04:39 PM
  5. Tanning Ledge/Beach Bubbler/Fountain Suggestions
    By jabre in forum In-Ground Pool Construction and Repair
    Replies: 7
    Last Post: 04-20-2006, 12:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts