CYA Question

[Watermom]

Sure. Go ahead and add some CYA in a sock.

On another note, what is the highest reading that your tester can register for pH? If it is 8.0, then your pH could actually be much higher than 8.0 and you would need to use some muriatic acid to lower it.

OR, better yet ....

Actually, if this is my pool, here is what I would do. It would kill several birds with one stone. Instead of continuing with bleach right now and adding CYA in a sock, use some trichlor pucks for awhile. That would add chlorine, add CYA and also lower your pH. Another alternative to using the pucks is to use some dichlor powdered chlorine. It will do the same things as the trichlor. Just make sure that the trichlor or dichlor does not have any copper in it. Keep an eye on your pH.

BBB doesn't always mean that we suggest only using bleach. Sometimes a different form of chlorine is a better choice.

[thorn138]

Thanks Watermom.. I read someplace where CYA lowers pH, so I was going to let it work for a while.. I'll go ahead and add the Muriatic Acid and I just happen to have Trichlor pucks in the garage..

Thanks again for the assistance!

[Watermom]

I think you may have misinterpreted what I wrote. What I meant was that if you're going to use the trichlor pucks, you don't need the muriatic acid. Have you already added it? The trichlor will lower the pH.