question regarding the Autopilot chlorine generator

[ArtCan]

I don't know how you can get the kind of test kits we recommend, primarily the Taylor K-2006 and Taylor K-2006C, because there seems to be an issue exporting them to Canada, but you should have stabilizer testers easily available there. I hope.

Carl

Hi CarlD,

Yes - you absolutely correct, I am only testing the Ph, Chlorine and total alkalinity levels (every week). I know that the pucks contain the stabilizer and actually my chlorine level is always a bit high (4-5%).. So far I was lucky not to get the stabilizer level too high..
So, what you are saying I now will need to monitor the stabilizer level.. I know a place where can I get the Taylor kits in Canada so I believe I will be ok.
I also hope converting to salt would make my life easier and I would not regret of doing that..

[CarlD]

ArtCan,

What the salt system does is make your system maintenance easier because you don't have to add stuff, but it is STILL incumbent on you to test your water religiously. You'll need to monitor the CYA (stabilizer) /FC relationship AND monitor salt levels as well. I believe most of the units have a salt level sensor, but, again, I'm not the expert. Some people report that pH tends to rise as well so they find they periodically have to add acid.

Almost all of our members who have salt-water chlorine generator systems LOVE them! We consider them proven, effective technology, not a gimmick.

Carl

[ArtCan]

yes, Carl - I hope it will be a positive experience to have a salty pool. As most people in this forum recommend Autopilot and it does have the salt monitoring I think I will be ok..
And yes - I will get the testing kit too for monitoring the CYA level..

thanks!
Art