Almost 2 Weeks & Still "Sea-Foam" Green!

[psbailey]

Thanks, Watermom and Sherra.

Do you (or anyone else) know where I can find a testing kit that measures Chlorine up to 15 ppm? My "dropper" kit only tests up to 5 ppm. When I did measure the water again, it was off the charts and looked bright orange!

Also, at what level do you keep pool(s) for swimming? When is it safe for the kiddies to swim?

Thanks,

Paul

[Watermom]

The best kit you can buy, and the one that most of us use, is the one that Ben sells at the sister site to this forum www.poolsolutions.com It will measure chlorine levels up to 50. Consider getting it. It is well worth the money and will test for any and everything you need to test for.

In the meantime, you can extend the range of your kit by diluting the sample. Take one part pool water and one part distilled water, mix, test as usual and multiply the result by 2. If you need go higher -- one part pool water, two parts distilled, multiply by 3, etc. Of course, you lose a little accuracy with each dilution, but it is better than nothing and usually better than a pool store will do.

What level you keep your pool's chlorine level at is dependent on your cya reading. See the chart at the following link for more about that.

http://www.poolforum.com/pf2/showthread.php?t=365

[psbailey]

A Follow-Up Note:

It took about 2-3 days, but the light-green color in the pool is gone. I do have some cloudiness, but it seems to improve a little every day.

I ordered Ben's kit and am waiting for it to arrive.

Thanks, everyone.

Paul

[Watermom]

Continue shocking and holding your cl at 15 until the cloudiness is gone. Also, keep running your pump 24/7. Glad it is looking better.