Hi Tippy and welcome to the Pool Forum. Sorry you haven't yet gotten a reply. I am going to ask Poconos, my fellow mod, to take a look at your post and see if he can help. He is pretty knowledgeable about motors.
I am installing a 2 hp a o smith centurion motor and the wires are one green ( ground )and two brown. Does it matter which brown wire goes on the contacts? Are the brown wires interchangeable ? Thanks
Hi Tippy and welcome to the Pool Forum. Sorry you haven't yet gotten a reply. I am going to ask Poconos, my fellow mod, to take a look at your post and see if he can help. He is pretty knowledgeable about motors.
Last edited by Watermom; 12-16-2011 at 05:20 PM.
I really don't know details of that motor but as a general rule if there is no color differentiation then it makes no difference. The internal connections, which are not as easy to get to, are the ones that determine the direction of rotation.
Al
I've posted a copy of AO Smith's full motor guide, here:
http://faq.poolforum.com/resources
I think it will cover your AO Smith / Centurion pool wiring questions.
PoolDoc / Ben
Hi! Do you have big pool? Why such a big pump motor? I have a 20,000 gallon pool and I run a 1hp 2 speed, mostly on low speed.
Carl
Carl
Bookmarks