Read the stickies/Still have closing questions.
Hey all,
I read the stickies and searched the forum, but still have a couple of questions.
I am prepping to winterize my IG pool for the 2nd time. I inherited the green slime pool last fall and did my best to close it down. We live in Middle TN, so winters aren't too severe, though last winter saw several days in the single digits. Ended up with one cracked shut-off valve to the heater, which I piped around, so all-in-all no major problems. But, I didn't do everything as well as I should have, obviously.
-Blowing the lines: Can/how do I use a Shop Vac to accomplish this? OR do I need to rent an air compressor from HD?
-Multiport: Do I need to remove this for TN winters? If so, how do I do this?
-Antifreeze: What's the best kind and where to buy?
-Polyquat: I have used the BBB method all summer with excellent results. Never used any Poly, do I need to now?
Thanks,
-A
Pool Specs: 20,000 gal. • inground • vinyl liner • Hayward s200 sand filter
21' kidney 20K gal AG pool; Bleach; Hayward S200 sand filter; Hayward pump; 8/10/2012hrs; Taylor k2600; utility water; summer: ; winter: ; iPhone; PF:6
Bookmarks