Hi,
First off, the polyquat that you added is a great algae preventative, but is way less effective at killing algae than plain old chlorine. With a CYA of 100, you should be keeping your chlorine between 8-15 ppm at all times, and to shock it, you need to take it up to 25 ppm. Taking the chlorine up and maintaining it at shock level until the algae is gone is the key to getting rid of it. Then if you want to use the polyquat after the bloom is taken care of, as a preventative, you can do that--but your chlorine is still going to need to be maintained at least 8 ppm (AND you need to stop using any stabilized chlorine products--trichlor pucks, dichlor powdered shock, etc.). So...whether or not to drain the pool is a decision that only you can make--you can drain and replace some of the water to bring the CYA down, or you can just maintain higher chlorine levels and keep the CYA level that you have. (See the link in my sig to the "best guess chlorine chart" for more info). Personally, I run a high CYA pool on purpose, and just keep my chlorine levels higher to compensate.
I would stop using the phosphree altogether if I were you, unless you live next door to a field of some sort that has mega amounts of fertilizer being applied. Phosphate removers are generally unnecessary, and are just an added expense. Instead, use that money for bleach!!
Bookmarks