+ Reply to Thread
Results 1 to 5 of 5

Thread: A surprising outcome

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: A surprising outcome

    The water temp was probably 68 F when we left and is 60 F now.

    I'm curious why the TA and pH dropped, can you help me understand that? The solar cover would have been a shield against the rain which, I'm told, was very heavy at times. In the past I've not noticed appreciable changes in water chemistry after heavy rains, i.e., Irene and Lee. Would just the sheer volume of rain be enough to decrease the alkalinity?
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  2. #2
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    66
    Posts
    2,226

    Default Re: A surprising outcome

    If you had enough rain to overflow and therefore dilute the pool water then it could lower the TA and pH (assuming acidic rain, which is typical, though it would take a lot to move the pH). From historical weather data, it looks like you had about 0.16" of rain every day so over 3 weeks that would be 3.4" so with a 4.5' avg. pool depth that would only be a dilution of 6.3% so I wouldn't expect much drop in TA or pH. It's possible the water didn't mix well (since your pump wasn't working) so unless you were taking a sample from depths, you might be measuring closer to rainwater measurements.

  3. #3
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: A surprising outcome

    I take the test sample from approximately 12" down.

    I had expected the decrease in FC, of course. That CYA, TA, and pH also dropped was a bit of a surprise, but so was that I had any free chlorine left at all. I had fully anticipated coming back to a slightly green pool.

    The new pump is up and running and doing a fine job.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts