+ Reply to Thread
Results 1 to 3 of 3

Thread: Help unlocking the Navigator locking vac lock flap

  1. #1
    Join Date
    Dec 2004
    Location
    .
    Posts
    8

    Default Help unlocking the Navigator locking vac lock flap

    We have a Navigator pool cleaner with a locking Vac Lock on the pool end side. W pulled the NAvigator out to go swimming yesterday, the flap closed and now I cant get it open. The manual does not show how to unlock the flap, can anybody help this poor sole...

    Thanks,
    Brian

  2. #2
    Join Date
    Dec 2004
    Location
    .
    Posts
    52

    Default Re: Help unlocking the Navigator locking vac lock flap

    make sure the pump is off (you have no chance if it's on), then use a flat edge (regular) screw driver to pry it open. There is a notch on the bottom and the screw driver head should fit in there and then just give it a twist. I can open mine by leaning over the edge without having to get in the pool.

    -- john

  3. #3
    Join Date
    Dec 2004
    Location
    .
    Posts
    8

    Default Re: Help unlocking the Navigator locking vac lock flap

    Thanks John that worked.

+ Reply to Thread

Similar Threads

  1. Pentair S-20 Weir Flap installation question
    By dmoservice in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 06-03-2012, 01:02 PM
  2. LADDER missing LOCKING NUT - HELP!!!!
    By DMand in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 06-13-2006, 09:28 PM
  3. Jacuzzi TRI - clops locking ring problem
    By jmcst25 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 06-04-2006, 10:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts