Results 1 to 3 of 3

Thread: Aqua Rite low salt reading when salt has been tested high

Threaded View

  1. 08-19-2011 02:51 PM #1
    DirtRider67's Avatar
    DirtRider67
    DirtRider67 is offline Subscriber DirtRider67 0
    Join Date
    Jul 2011
    Location
    SoCal
    Posts
    32

    Default Aqua Rite low salt reading when salt has been tested high

    Hi, i just had my turbo cell tested at my local pool store and it passed so the cell is in working order.
    Whe i turn the SWG on, the green power light comes on and the generating light comes on for about 30 seconds then shuts off and the low salt light comes on. The salt was tested at 4000 ppm so i know it's not low. Anyone have an ideas?
    also, my cya is only 50. do you think this could be the problem?
    thanks
    Last edited by DirtRider67; 08-19-2011 at 02:59 PM.
    23k gallons - Aqua-Rite salt system
    pebble-tec inground
    hayward super clear with paper cartridege filters - 1/2 hp pump
    Reply With Quote Reply With Quote
« Salt Cell Replacement | Erratic (or intermittent?) Control Box for Pool Pilot Digital DIG-220 »

Similar Threads

  1. Aqua Comfort heater Model 125 Temperature Reading too High
    By stefanoman in forum --cleanup--
    Replies: 0
    Last Post: 06-08-2013, 06:42 PM
  2. Jandy rs6 lost remote control settings on aqua rite salt system
    By Txpool89 in forum Pool Electronics
    Replies: 1
    Last Post: 08-01-2012, 11:11 PM
  3. Correcting a No flow problem on Aqua rite salt water system.
    By Knipper in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 05-30-2011, 11:53 AM
  4. Weird Salt Reading in a Non-SWG with salt
    By smallpooldad in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 07-07-2006, 10:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules