+ Reply to Thread
Results 1 to 7 of 7

Thread: First Season, First Test with PS234

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    25

    Default Re: First Season, First Test with PS234

    Dave,

    Thanks for the advice...

    From what I've read here, given a CYA of ~35 I should keep my FC level at 3-6ppm and shock up to 15ppm when CC is 0.5 or above. Your advice of shocking with bleach instead of using the SWG shock cycle once I get the SWG online makes a lot of sense. Thanks for the advice.

    I didn't realize there was a "pics" section. I'd post pics, but I can't seem to find where to post them. Could you point me in the right direction?

    Thanks,

    Pat.

  2. #2
    duraleigh Guest

    Default Re: First Season, First Test with PS234

    "Odds n' Ends"....then "Off topic and General interest".....then "new pool pics"

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    25

    Default Re: First Season, First Test with PS234

    Thanks... just posted a few pics from last year before I had finished landscaping.

    Pat.

+ Reply to Thread

Similar Threads

  1. help with first results of the season, ps234
    By vinouspleasure in forum DPD-FAS based testing
    Replies: 11
    Last Post: 06-19-2008, 09:12 PM
  2. ps234 test results, first of the season
    By vinouspleasure in forum DPD-FAS based testing
    Replies: 4
    Last Post: 05-27-2007, 10:48 PM
  3. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM
  4. First test of season...what to do?
    By TfromNC in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-07-2006, 12:42 PM
  5. 1st test this season
    By donfranko in forum DPD-FAS based testing
    Replies: 1
    Last Post: 04-12-2006, 08:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts