Had the water tested at the pool store again today to see how the CYA is doing.

FC: 5
TC: 5
CYA: 50
PH: 7.4
TA: 220

The pool is nearly clear, just a little bit of cloudy, but this is the best I have seen it since it was filled.

The pool store person mentioned that the TA level has high and would rust out the metal frame. When I add bleach, the PH rises so I use acid to bring it back down, will this normal use bring the TA into check over time? Or do I need to get this down sooner and start adding acid at regular intervals and then use something to bring the PH back up?

Thanks again for all the help so far... The kids finally will get to use the pool again this afternoon and are extremely happy.

Jamie