I need help getting a plumbing answer to a Pentair valve kit; 261050. Does anyone out there have one and can tell me how did you plumb it?

I have a Pentair multi port valve kit (valve number 261050) for a sand filter. The ports on the side are labeled Return and Waste. I asked the salesman where I bought it how to plumb it and was told that the Return line came in from the pump and the Waste line ran to the heater. The line coming out the bottom was for the Back flush hose. From the perspective of the filter, this made sense to me. Water “returned” to the filter and “waste” is something that leaves. (Why didn’t Pentair say “in and out”)

So, I had it plumbed that way and, of course, it doesn’t work. No matter what position the handle is in, water rushes out the “back flush” hole at the bottom. Pentair doesn’t have plumbing instructions online and it didn’t come with any, which is why I had to ask in the first place.

I have called Pentair, talked to two different reps each gave me a different answer and both answers were different from how it’s plumbed now. Is there anyone out there that has this valve, that it’s working properly, and can tell me how to plumb it?

Thanks