+ Reply to Thread
Results 1 to 10 of 11

Thread: SG effect on aluminum?

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Richmond Hill Ontario Canada
    Age
    62
    Posts
    27

    Default Re: SG effect on aluminum?

    Hi kjmelak

    We have been absolutely clear on our position when it comes to above ground pools. There are corrosion issues that need to be realized before you go ahead and install ANY salt chlorinator on an above ground pool. The sad reality is that most of the other manufactures are now marketing an above ground pool model to capture the market in these pools. I don’t think that Autopilot is pushing a model for above ground pools (perhaps Sean can clarify this) but Watermaid definitely DOES NOT push salt chlorinator use on above ground pools. With that said, there are still Watermaid units on above ground pools out there but we have had a heart to heart talk with every customer and advised them that although there are a lot of good reasons to install a salt system, they also need to be aware of the down side.

    Perhaps the best way to deal with this question is to go to the manufacturer of the pool and see what they think of salt chlorinator use on their pools and what it will do to the warranty. If the walls corrode and blow out in 5 years, I bet there will be a lot of finger pointing from all camps and it will without a doubt be you left to pay for the problems. We would rather have people laugh at us for missing a huge market than be blamed for not warning people of the possible down side

    Mark Manning
    Watermaid Canada
    www.watermaid.ca
    mark@watermaid.ca

  2. #2
    Join Date
    Dec 1969
    Location
    NY
    Posts
    131

    Default Re: SG effect on aluminum?

    Not to beat a dead horse but...

    If there is such concern over AG pools, why isn't there same concern for IG steel pools? Water certainly will come in contact via splashing and possible leaks. Wouldn't the effects be the same?

  3. #3
    PatL34 is offline Lifetime Member Widget Weaver PatL34 2 stars PatL34 2 stars
    Join Date
    Dec 1969
    Location
    Saint Cloud, FL
    Age
    88
    Posts
    331

    Default Re: SG effect on aluminum?

    Yes, but not as catastrophic as an AG pool. More a nuisance.

    Pat.
    20,000 Gallon IG Diamond Brite pool, 1.5 HP Sta-Rite pump, Hayward Microclear DE3600 filter, Favco solar panels, Poolpilot DIG-220 with SC-48 cell.

    + SWCG OPERATION thread here: http://www.poolforum.com/pf2/showthread.php?t=1226
    + SWCG Running Costs post here: http://www.poolforum.com/pf2/showthread.php?t=316
    + Effective Stabilizer addition post here: http://www.poolforum.com/pf2/showthread.php?p=6645

  4. #4
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Age
    62
    Posts
    665

    Default Re: SG effect on aluminum?

    AutoPilot also does not market an above ground salt chlorine generator. However, I can only provide examples that I personally know of. Our in-line cell have been used on larger above ground pools for years without any damage. I think if you get into a maintenance program of spraying off the walls so the salt gets rinsed down or diluted, you're less prone to corrosion due to the salt. We have the benefit of alot of rain and lawn sprinklers to wash down the salt here in South Florida.
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com

  5. #5
    Join Date
    May 2006
    Posts
    43

    Default Re: SG effect on aluminum?

    Thanks for the input. I decided to hold off on a salt chlorine generator for the time being. I would love to have this system on my pool, but I also don't want to have problems down the road. I would like to do a little more research - maybe next season!

    Kevin

+ Reply to Thread

Similar Threads

  1. Question about Trichlor effect on TA and pH
    By Chuckles76 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 06-17-2013, 05:54 PM
  2. Low PH-10Lb of Borax Had No Effect
    By NAPA242 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-25-2012, 10:44 PM
  3. Effect of adding a DIY PVC solar heating system
    By frankinbahia in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-01-2011, 12:58 PM
  4. Aeration and its effect on pH
    By JBfromNJ in forum Dealing with Alkalinity and Calcium
    Replies: 7
    Last Post: 05-21-2007, 12:31 AM
  5. How long for muriatic to take effect?
    By BillyBumbler in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-21-2006, 05:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts