Re: Vacation Plans and Fall prep
When I went on vacation for 2 weeks this summer, on advice of this forum, I just established all of my levels really well (high chlorine, though...I think I had it at about 12 ppm) and turned off the filter and left. When I got back, everything was fine, though I did have a slight green hue to the pool that cleared up within 1/2 a day of adding a good dose of bleach. Of course, after a week, all of my Cl was gone. Long story short, I was swimming the next day.
Normally, I have friends that come over and care for the pool, but one of them had surgery the week before and I didn't want to burden them this time. Also, you can't just ask anyone to do this. They need to be familiar with how to test and add chemicals and what to do if there are problems.
I understand your husband's trepidation entirely. I didn't want a burned out pump or the water level to get too low of any of a dozen other scenarios that played out in my head.
AG 7600 gallons, sand filter, 1.5 HP Hayward pump (1 speed), K-2006 test kit
Bookmarks