+ Reply to Thread
Results 1 to 4 of 4

Thread: Code Brown!

  1. #1
    Join Date
    Jun 2011
    Posts
    21

    Default Code Brown!

    Just put the kids in the pool for an evening swim and my 3 year old didn't quite make it out of the water before doing #2.

    How high do I need to shock to make the pool safe to swim? It's supposed to be 102 here tomorrow (SE Pennsylvania) so I'm sure the kids will want to swim but it's pitch black out back right now so I won't be able to add the chlorine until first thing in the morning.

    Jim

  2. #2
    Join Date
    Dec 2005
    Location
    Jupiter, Fl.
    Posts
    36

    Default Re: Code Brown!

    The best time to add CL is at night as there is no sun to break it down. Shock your pool based on the recommendations published on the forum and you should be fine. In fact, the CL that you already had in the pool probably did the job already.
    I live in South Florida. I have owned my first pool for 6 years now. 12,200 gal. with exposed aggregate finish, spa with spill over, cartridge filter, pop up bottom cleaning jets, Chlorine by swg. I am eternally grateful for The Pool Forum!!

    15'x30' Rectangle w/ ovals at ends 12.2K gal IG pool; Bleach now as SWCG died.; Hayward 1200 cartridge filter; Emerson 2HP pump; 6hrs; Taylor K-2006 La Motte Borate Test Strips; utility; summer: ; winter: ; iPad; PF:9.8

  3. #3
    Join Date
    Jun 2011
    Posts
    21

    Default Re: Code Brown!

    Thanks, Denny! I appreciate your info.

    I guess my question would have been better worded if I'd asked "do I need to bring the pool to shock level after this?" I couldn't see anything in the dark last night to add and test FC shock levels, but I do test daily and have been consistently within Ben's recommendations for FC on the Best Guess chart. It's going to be 102 today so it will be torture trying to keep the kids out of the pool if I have to bring it up to shock level today.

    Without getting graphic, the accident was mostly contained. I think I'm going to boost my FC up to a max level this morning and let the kids swim later in the day. Anybody have concerns about this plan?

    Jim

  4. #4
    Join Date
    Jul 2010
    Location
    Largo, Florida
    Posts
    509

    Default Re: Code Brown!

    If it were my pool, I'd rather have the kids in with a little higher chlorine than take the risk of bacterial infection. If your CYA isn't very high then the high Cl level will be gone rather quickly due to the sunlight anyway.
    rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10

+ Reply to Thread

Similar Threads

  1. Raypak Heater won't start getting a SNS code
    By Dirt007 in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-27-2012, 04:30 PM
  2. Raypak RP2100 SNS code need help?
    By shutitdown in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-01-2009, 11:32 AM
  3. NEC code for Pool Eletrical
    By beary in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 02-25-2007, 06:51 PM
  4. National electric code
    By Sean-NJ in forum In-Ground Pool Construction and Repair
    Replies: 7
    Last Post: 07-28-2006, 09:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts