Thank you for the welcome and the tip on the search function. That is nice. I was not necessarily counting on using the liner when I purchased this pool but after acquiring the pool and opening the liner up to inspect it and to do whatever was needed to clean it up we found it to be in quite acceptable condition. We found no suspicious looking areas and we went over the liner thoroughly brushing off with water only to get to a nice clean state for the reinstall if that is the way that we chose to procede. This liner was used for one season only and has been stored outside folded up for about a month. For whatever reason the people sold their house and moved and took the pool with them. They were just before reinstalling the pool in their new location and found they had to move for job related reasons and could not take the pool with them. This is a 27 foot round AG Pool by Aqua Leader. The top ledge and top and bottom track as well as the verticals are resin. The wall is metal. I tell you this info just to let you know what the pool is in case it has a bearing on the method of install I should follow. I do know the pool company that sold and installed the pool new and am intending to call them to see if they would recommend the reuse of the liner or not. I plan to do the install myself and would surely benefit from any experience anyone could share about getting this used liner properly aligned in the new location.