Results 1 to 10 of 20

Thread: Bleach not staying in pool?

Threaded View

  1. #8
    KurtV is offline Registered+ Widget Weaver KurtV 0
    Join Date
    Dec 2004
    Location
    Mandeville, LA, USA.
    Posts
    418

    Default Re: Bleach not staying in pool?

    Re-reading Ben's article that Evan linked to makes me doubt that the single dose of Yellow Out is the culprit, especially if bromine is the primary ingredient. Ben refers to "repeated or excessive doses" which a single, normal dose of yellow out wouldn't seem to be. Also, when testing with DPD, doesn't bromine show up just as chlorine would? In other words, wouldn't every ppm of bromide ion that was converted by the chlorine into free bromide, thus "consuming" the free chlorine, show up on on a DPD test just like free chlorine?


    Just a thought.
    Last edited by KurtV; 05-11-2006 at 07:54 AM.

Similar Threads

  1. Intex interlocking parts not staying locked.
    By domerfan in forum Intex-type Pool Setup & Operations
    Replies: 2
    Last Post: 06-28-2013, 07:52 AM
  2. Taking the High Phospate advice and going to get a real test kit, staying tuned
    By dixiefied in forum Pool Chemicals & Pool Water Problems
    Replies: 5
    Last Post: 07-24-2012, 02:33 PM
  3. Chlorine is staying in the pool. Water is muddy
    By olover49 in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 06-13-2012, 11:04 PM
  4. Need a little help CL not staying in
    By joanie109 in forum DPD-FAS based testing
    Replies: 1
    Last Post: 07-12-2007, 12:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts