Closed Thread
Results 1 to 10 of 15

Thread: pump piping

Hybrid View

  1. 05-10-2006 08:55 AM #1
    duraleigh Guest

    Default Re: pump piping

    Thanks for the helpful pics...I see the primer. Looks like you used the existing suction side into the pump and only remodeled the pressure side. What joints aren't holding?

    It appears all you need to complete is a nipple into the pressure side fitting on the pump. What am I missing?
    Last edited by duraleigh; 05-10-2006 at 09:06 AM.
Closed Thread
« Wall fittings | What type of caulking do I need? »

Similar Threads

  1. Recommendations For Replacement Pump Or Pump Motor (1.5" Piping, High Head)
    By ChuckDavis in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 05-25-2013, 03:56 PM
  2. Upsize Pump And/Or Piping?
    By ChuckDavis in forum Pool Equipment & Operations
    Replies: 14
    Last Post: 05-31-2012, 01:42 PM
  3. Pump and Heater Piping
    By MaxxFusion in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-06-2009, 09:43 AM
  4. Piping filter/pump/heater. Any tips?
    By cruzmisl in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 05-25-2007, 10:52 AM
  5. Pump return piping and "looping"
    By eljefe281 in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 08-09-2006, 10:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules