+ Reply to Thread
Results 1 to 10 of 15

Thread: too small to get grabbed by filter while vacuuming?

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: too small to get grabbed by filter while vacuuming?

    You could also try a fresh skimmer sock, they catch an astonishing amount of fine 'dust'.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  2. #2
    Join Date
    May 2011
    Posts
    37

    Default Re: too small to get grabbed by filter while vacuuming?

    Thx for the tips waste and annak, I just added the d.e.

    Im not sure about the sock, its a pretty hefty amount of fine stuff. I vacuumed out 80% to waste out of the pool but it initially covered the whole pool floor so that sock would be filled pretty quick. Right now i only have a basket in and no sock so it cant hurt to try one.

    Im crossing my fingers that the de works.

    Anyone have any idea what the stuff could be. the water was new fresh water when i refilled it so its either some sort of algae, or something from the busted filter shooting back in?

  3. #3
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: too small to get grabbed by filter while vacuuming?

    Could be any number of things. If your test numbers are good then it isn't algae. 'Good' means CC of 0.5 or none. Could be dirt carried by wind. Do you live in a rural area where farmers might be discing, tilling, spreading lime, seeding? Do you have trees or fields around that could drop pollens?

    And yes, it could come from the repaired/rebuilt filter. Occam's Razor, you know? If it quacks like a duck and etc. The DE might well do it for you. Skimmer socks are great but when you have a lot of fine debris you do have to babysit them and replace them frequently. When I vacuum with a sock in the basket I normally have to stop halfway through and replace it.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  4. #4
    Join Date
    May 2011
    Posts
    37

    Default Re: too small to get grabbed by filter while vacuuming?

    nope nobody tilling or farming near me. i live in pennsylvania but not deep into it, just outside of philadelphia.

    ill go out in the morning and reassess it. then try to get a sock at some point.

  5. #5
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: too small to get grabbed by filter while vacuuming?

    You usually cannot vacuum with a skimmer sock in place because you have to take out the basket.

    If your pump is what is called "uprated", it's probably OK with your filter. However, if it's what is called "full-rated" it is almost certainly too much pump and stressing or even damaging your filter.
    Solutions:
    1) Get a bigger filter or
    2) Get a smaller pump or
    3) Get a smaller impeller for the pump so it reduces the flow. If everything is good, this is the least expensive solution. The pump guys can help you with that.

    Carl
    Carl

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: too small to get grabbed by filter while vacuuming?

    Carl,
    When I vacuum, I do not take my skimmer basket out. But, at any rate, I agree that you should remove the skimmer sock when you vacuum.

  7. #7
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: too small to get grabbed by filter while vacuuming?

    Quote Originally Posted by Watermom View Post
    Carl,
    When I vacuum, I do not take my skimmer basket out. But, at any rate, I agree that you should remove the skimmer sock when you vacuum.
    do you have one of those 5" round angle plates? If no your vacuum usually goes in the pipe at the bottom of the skimmer case, requiring you to remove the basket.
    Carl

+ Reply to Thread

Similar Threads

  1. Brown water while vacuuming - Possible filter problem
    By byron366 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 06-17-2011, 06:05 PM
  2. Filter too small & Pump too big??
    By Hey_Dad in forum Pool Equipment & Operations
    Replies: 12
    Last Post: 06-06-2011, 08:35 PM
  3. Problems Vacuuming with New filter
    By jimmurphy24 in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 07-22-2008, 04:26 PM
  4. Small Filter Leak
    By Orkalovesfood in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 06-06-2007, 09:44 PM
  5. quick question about vacuuming with sand filter.
    By rnjng in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 07-30-2006, 04:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts