Results 1 to 10 of 11

Thread: Help - problems with Bioguard MS11

Threaded View

  1. #7
    Join Date
    May 2006
    Location
    Potomac, MD
    Posts
    22

    Default Re: Help - problems with Bioguard MS11

    Well, the morning test results are in.

    Sat Idx: .1
    TDS: 5000
    CYA: 74
    Tot Chlorine: 5
    Free Chlorine: 5
    PH: 7.7
    Demand drops: 1
    Tot Alk: 125
    Adj Alk: 103
    Hardness: 165
    Salt: 4200
    Borates: 30

    So, it looks like my fears were right and the cell is bad - and I've over added salt - do you think this is too high or can I live with this?

    No visible scale on the cell, I let it soak in the diluted acid for over 20 minutes. I'm surprised it is bad already, according to the documentation this is the beginning of the fourth season, and the first was a very short one - so usage wise this would be the beginning of the third.

    I've ordered a new cell, should have by mid next week.

    Anything else you think I should do?
    Last edited by kevinm; 05-11-2006 at 10:35 AM.

Similar Threads

  1. BioGuard's Mineral Springs Salt
    By Darwin in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 04-17-2012, 11:56 AM
  2. Sandman15 first Post-Problems with Bioguard SWG
    By Sandman15 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-07-2011, 12:03 PM
  3. Bioguard Softswim??
    By yjjeeper in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 06-10-2007, 09:25 PM
  4. CYA and Bioguard sticks
    By BigStein in forum Using Chlorine and Chlorinating Chemicals
    Replies: 2
    Last Post: 08-18-2006, 06:08 PM
  5. Help new BioGuard Mineral Springs
    By wsmith002 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 11
    Last Post: 06-19-2006, 05:01 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts