I had to drain and refill, the ground settled creating a very lopsided pool (scary).

Filled last night, only thing added is 120 LBS salt to bring me to ~3000 PPM (for the SWG) and 92oz of bleach to shock.

Bleach was added @6am, water was tested @10am, pool has a solar cover on it.

Numbers from the Taylor kit
FC=10
CC=0
PH=7.8
TA=160
CH=180
CYA=0

I have Borax on hand that I had intended to add as a PH buffer and algae control, based on my numbers is this a good or bad idea?

I also have Muriatic acid to offset the PH rise.

Will also be adding CYA, Thinking I will target 50 PPM, this pool is going to experience a fair amount of splash and carry out.

Thanks for any feedback.