I have a jandy lite 2 wired 110 controlling a pump wired 220. My electrician friend who does many pools set this all up and has been trouble free 7 years.

Today the pump doesnt come on. The heater control interface shows the little pump gear going around but there is no power to the pump outlet.

Initially the 2A fuse on the board was blown so I changed it. Still hasnt blown. Just wondering if..... pump plug was very difficult to pull out... could the outlet simply have melted internally because it seems that the heater controls would lock out power to the pump outlet if it was a heater issue....

Any speculations....checked for power inside the pump outlet box....fine. Power to the board from the breakers is fine.