Re: Intellichlor IC40 SWCG not generating
I can't help with the PWR light issue but I am concerned that they had you clean the cell with pure muriatic acid. It should be done with an acid / water mixture as described in the cleaning procedures:
3. Mix one quart of muriatic acid with one gallon of tap water in a plastic five (5) gallon bucket. Always
add acid to the water, never add water to the acid. Always wear eye protection and use rubber gloves.
Always work in a well-ventilated area.
Here is the complete procedure:
http://www.pentairpool.com/pdfs/Inte...aningKitIG.pdf
What is your salt level and what does the Intellichlor manual recommend?
Last edited by Phillbo; 06-26-2011 at 02:24 PM.
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Reply With Quote
Bookmarks