+ Reply to Thread
Results 1 to 2 of 2

Thread: first pool, first test with the ps234

  1. #1
    Join Date
    Dec 2005
    Location
    Weskan, Kansas
    Posts
    23

    Default first pool, first test with the ps234

    I have an AG 30' X 52" pool w/vinyl liner that was filled for the first time two weeks ago. I think my volume is around 17000 gal. Please correct me if that sounds way off. My first results are as follows:

    FC 5.5
    CC 0
    TC 5.5
    PH 7.6
    ALK 240
    CAL 130
    CYA <20

    There was some cloudiness in the cya test but not enough to make the dot go away at 20ppm. I added 2 lbs of cya at open and just added another 1 lb today after the test. Is there anything else I should be concerned about? Water looks nice and clear.
    Thanks for your help,
    Dave

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: first pool, first test with the ps234

    For the moment, I think you are OK. Your Tot Alk is high--We generally like to see it at 80-120, but in a vinyl pool anything up to 180 is FINE, and up to 200 is tolerable.

    But get your CYA straight first. Since your water is clear, and your FC is fine, just get CYA to 30-50 and see how you are. If you get milky cloudiness, you'll have to lower Tot Alk, but if the water is clear, it shouldn't hurt.

    You can read up on how to lower Tot Alk in the Alkalinity and calcium forum. Do NOT add more calcium NO MATTER WHAT THE POOL STORE SAYS! If your calcium goes high, with a high Tot Alk, you'll get milky water. Don't use Cal-Hypo to chlorinate either.
    Carl

+ Reply to Thread

Similar Threads

  1. Pool Opening - PS234 Test
    By rhosk in forum DPD-FAS based testing
    Replies: 14
    Last Post: 05-26-2018, 02:01 PM
  2. PS234 Test
    By Bruce A in forum DPD-FAS based testing
    Replies: 3
    Last Post: 07-16-2006, 08:25 PM
  3. 1st Test with PS234 W/ copper test
    By JJSZABO in forum DPD-FAS based testing
    Replies: 4
    Last Post: 07-07-2006, 03:15 PM
  4. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM
  5. First test with PS234
    By tbatti in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-13-2006, 11:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts